Assistant editor Emily Padfield machines summarizes the main developments and new models on the screen for a visit to the event.

The show, which in 2011 has over 600 trade stands will be held for two days in the Newark and Nottinghamshire Showground.

For the latest news and video Lamma see our special page.

————————————————– ——————————

T100 McCormick Max gives all-out call

With a new axle at the rear of the shuttle transmission and electric PTO and hydraulic control, T100 92hp McCormick’s-Max is an ideal to strive for both companies and common equity, the company said .

Standard spec includes a telescopic pick-up and lower arms of detection for control of electronic project.

  ————————————————– ——————————

New Holland Series T8

Perhaps the most radical changes in the New Holland line-up comes in the shape of the new range T8.

With a long wheelbase (the T8. Measures 3.45 m making it the longest semi-HP in this range) the hood is lifted and sculpted to allow steering.

The T8.275, T8.300, T8.330, T8.360 and T8.390 SCR equipped models receive engine Iveco Cursor 9 liters with an output of 232hp to 335hp and a maximum power of 273hp to 389hp.

For the first time, it is now possible to choose a fully integrated distribution before connecting with a capacity of nearly 6.3 tons

————————————————– ——————————

Deutz-Fahr TTV Farm 430

Deutz-Fahr has the smallest CVT-equipped tractor to date shown on Lamma.

The 110 hp 430 Agrofarm TTV uses the same transmission that brothers and sisters more powerful, offering advantages such as precise control of speed and low engine speed of transport. The Deutz four-cylinder Tier III engine has a power of 109ch.

Pilot to control the speed of the tractor via a joystick, which allows them to take the trigger to stop without using the brake pedal.

Standard spec includes three UK PTO, electric diff-locks, and an open center hydraulic lifting capacity of the system of 5300 kg.

 ————————————————– ——————————

Popular T7. connected by short wheelbase models

Under NH, visitors can see the T7000 series renamed and expanded.

Nine models are on the media to stimulate max 150-171hp to 230hp from 269hp. Powered by a Fiat Powertrain Technologies 6.7-liter equipped with SCR, the T7000 series existing (now T7). With the CVT versions of short wheelbase T6050, T6070, T6080 and T6090 models semi-powershift.

These will be badged as the T7.170, T7.185, T7.200 and T7.210 (the name denoting the momentum hp) and will be available with all the extras on the T7S more.

————————————————– ——————————

Case IH Puma CVX

Three short wheelbase tractors were added to the brand Puma, while the number of the series to eight.

The Puma CLC 130, CLC 145 and span the 160CVX 131hp (171hp max) 160 hp (203hp) and the support, as its name suggests, are all available with the CVT. The eight models feature a 6.75-liter engine FPT.
————————————————– ——————————

John Deere round 8R

John Deere has launched five models are up-8R series, which ranges from 260 hp to 360 hp and use the brand new 9-liter PowerTech PSX six-cylinder engines rated.
Tier LLLB standards, these engines use gas recirculation, a variable geometry turbocharger and exhaust gas filtration with a filter.

The new model has already broken all records of fuel consumption, Deere said, after being tested at the Nebraska Tractor Test Laboratory (nettl) United States – which is the equivalent of the DLG Test Centre Europe.

Before changing the engine, the 8320R in 8430 broke the previous record for the tractor HP’s most affordable major row crops ever tested, this record is now broken again by the new 8295R 225g/kWh who succeeded in the test PTO same, beating the previous 8320 figure of 228g/kWh

————————————————– ——————————
Upgrade offers Quadtrac

It consists of four models, the new range Quadtrac now ranges from 502hp to 670hp.

Each room is equipped with a 12.9 liter FPT Powertrain with RCS, but 550 and 600 models get two-stage turbo wastegate instead of the Standard on the 450 and 500 tractors, the secondary unit that the momentum functionality for power management.

The reader is a 16×2 Powershift Powershuttle. Tests indicate that the new engines a 9% improvement in efficiency over their predecessors phase 3a, says Case IH, in addition to operating high-powered cooler.

The new booth will feature a multi-arm control with new AFS Pro 700 monitor.
————————————————– ——————————

Landini Power World 120

Landini has seen the first tractor four-cylinder double the power to build on the show.

Powered by the same 4.4-liter engine with four cylinders that Perkins 102 hp and 110 hp models, the 112hp electronic engine management assumes that provides extra power of 121hp 9hp PTO and transport work.

Electronic engine management also allows less touring on road speeds, according to Landini, drop speed 1830rpm when the driver is 40 km / hr.

The World Power 120 will be available only in assembly equipment Top Landini, which means he gets a front 36, 12 reverse transmission with three quarter-on-the-go powershift steps.

————————————————– ——————————

T9 range NH

There are two tracks to the T9 NH articulated tractor, consists of two large pieces of high-power models, and four smaller models.

His list of 1m wide and that they can be shod with super simple that it can limit the requirements of 3m transport width.

T9 range covers the power range 354-608hp and will also use the Iveco Cursor engines with SCR. The smallest T9.390 is equipped with a 9-liter engine, while the T9.450, T9.505, T9.560, T9.615 and T9.670 all models that the larger plant capacity of 13 liters . HP Boosted now stands at between 390hp and 669hp.

————————————————– ——————————

Tractors are dangerous. They have a high priority. I confess and ditches and steep hills on my property and it would be easy for my tractor to run on its side, or even on your back.

Prevalence cage is very simple, but it is not the type you want tinkering. It must be strong and deeply attached to the tractor frame.

Pay attention to the safety instructions in the shaft. For example, shank came with strong warnings not to drill holes or weld the roll cage, no matter how much you want to add light to taunt her. You do not want to play with a roll cage, for fear of weakening.

One drawback of the roll cage is that the tractor size. He bumps into the tree branches high enough, for example. So this is not an unmixed blessing. But I am glad to have him.

The shank came with a belt. The guide says always wear seat belts, roll bar, because you can not prevent, attached to a tractor if you can not stay in his chair.

A bar has tractor general role of a few members of the vertical box located on each side of the location of the operator of the lower end of the box beam members sturdy houses with rear-wheel drive. The top of the box beam members are connected to a crossbeam in general over the driver’s seat. Each member upright box beam with a plate welded to the elongated lines the inside of one side of a member of the light box and the projection of a distance from the opposite plates to engage the other side to limit lateral Nappa of the vertical box beam member at a side of the tractor.
1. In a tractor with a tractor frame, including a substantial transmission housing to the rear and a pair of lateral expansion enclosures on both sides of the transmission housing with a pair of wheels arranged at the ends of the casings of axes, station manager between the wheel and the transmission housing assembly with a combination of an improved framework operator protects comprising: a pair of generally vertical bar members positioned on either side of the box station manager and bottom are connected to the houses in ashes, an elongated, extending along the body of the loop onto one side of each page, a cages inside light box and projecting them to a distance from the opposite side of the box beam members said loop control in the exercise said opposite side, after a certain amount of prior Buckling of box beam element to restrict deformation thereof, and a horizontal crossbar placed above the cab and connects to the top of the bar members.

2. The invention defined in claim 1, where each loop body consists of a vertical transverse plate is generally removed in the box beam member with an edge, said one side wall and the other side of said distributed over the entire face.

3. The invention defined in claim 2, where the lower part of each member box vertical bar has a rectangular cross section with opposite sides substantially wider than the front and rear plate loop members are located at the bottom of the box beam member and destroying the middle between front and rear.

4. The invention defined in claim 3, where members of the box beam is made of a pair of opposite channel-shaped members with the edges welded together, with plaque control loop members attached to the section on the arm of one of the channels.

5. The invention defined in claim 2, where the plate body control loop is attached to the outer sides of the vertical members of the box and extending towards the inside.

6. In a vehicle with a chassis assembly with the combination of an improved framework operator protector including at least one vertically elongated hollow beam member opposite sides, includes a control panel in a loop edge lay on one side and projecting laterally opposite edge and distributed loop control of said plate with said engaging side, after a predetermined amount Buckling of the face member of this board to deformation of the member to restrict said location and means for attaching the bar to the chassis members.

2. Front wheel grease seals are rubber and metal from the central to the tenants.

3. N tractors have a common sump for the rear hydraulic pump and transmission. There are three drain plugs under the tractor and a tank cover behind the gear. Changing the fluid, you should start with removing the pipe plug in and go back to the hydraulic pump and then transmission. Use only Ford 134D MC-90W hydraulic oil or mineral oil. The modern equivalent to 90W mineral oil TSC Traveler brand GL-1 or NAPA part number 65-205.

4. True 12Volt coils on 12Volt conversion gives sparks hotter than OEMs 6Volt coils and resistors are combinations.

5 . The governor has a long leg and one short bolt, make sure that the short bolt put on the top. If you long bolt at the top, your next project is to replace the timing gears.

6. Add just the right amount of hydraulic fluid, remove the lower bolt of the inspection plate, if you not only clean silt in the pump base, it will only have 4? gallon (not 5) of the hydraulic oil. When the oil seeps from the hole, it is enough. More fluid will seep past the seals and brakes. Mark your dipstick accordingly.

7. As a minimum you need a handbook for your N, and I & T FO-4 Shop handbook. A parts catalog is a good addition.

8 . It is not necessary to add. Lead. for gas or use hi-test gas. This is a low compression (6.5:1), low hp (23hp) engine with hardened valve seats.

9. General but not universal – consensus N owners are spending more money in oil wash, with the weight of the oil is determined by the engine wear and outdoor temps, motorcycles worn a heavier colder temps and light oil.

10. Regular lubrication of your 8N control box is much, much easier than disassembling your steering box to replace the upper unlubed rented. Look to the right of the steering box, just above proof meters. Remove the bolt and hold a piece of pipe with one. J. hook at the end of the bolt. You find the hole going into the management field. Get some plastic, stick it on the end of your bottle of 90W gear oil (or, 140W outboard oil) and fill it up. No, you just can not the acorn nut from the top of the steering column, and fill it from the top.

11. Use Champion H-12 or AL437 Autolite plugs if they hotter than the original spec Champion H-10s run.

12. If you forget and leave the key on and the issues that happen to be closed when the engine stopped running, but about 99% chance that the points are burned. If your very unfortunate, it is perhaps the ignition switch and coil. Turn the key.

13. Muffler clamp has a great page and a small part, the big hand goes to the bottom. Put some foil under the clamp to reduce exhaust leak and a coating on the bolts / nuts on the terminal with a connection not grab will allow you to replace film without purchasing a new terminal.

14. The hydraulic pump safety valve is set at around ? 1300. However, the front wheels of the N comes from the ground at about 800 pounds.

15.  Henry Ford was a thrifty man could never be installed on a tractor or a car that was not essential for its operation. The fuel shut-off valve of the sediment bowl is one reason for the closure of the gas when the ignition key. every time! If you forget and leave it on, and the needle valve or float in your carb is bad, and the intake hose from the air filter is securely attached to the carburetor will flow from the carbohydrates in the intake manifold and the engine, fill the pan with oil-gasoline.

16. Napa part number for the sediment bowl pack is 730-9506, they are 50 cents each. Stock up. Napa oil filter number is 1010th

17. If your tractor is sitting on frozen ground, backup before you try to move forward. If the wheels are frozen to the ground, and let the clutch in a forward gear, the tractor may flip over.

18. When the cap of 8N, first drain all the gas from the tank and secondly, to ask neighbors for help.

19. Always back up a trailer, so you will not be reversed.

20. A successful OEM starter lock worth time and money, although it is cheaper and easier just to bypass a new starter switch.

21. Has a trailer. Fences. on the front of the trailer, so you do not roll off.

22. Carry (mount) a fire extinguisher and to shake or touch the powder on each other Mon A fire extinguisher can easily be fitted with radiator clamps on the left arm (the one without the leveling box).

23. Do not wear loose clothing that can be caught in the PTO.

24. There is a right and a wrong way to put brake shoes on again. Take the trouble to the feathers or reverse cross-axis 180 degrees.

25. Always use a walking Running Coupler (ORC). The ORC is a ratchet-like device that fits PTO. This prevents the centrifugal force of a heavy piece of equipment, run as a bush pig, tractor forward as you slide the clutch in.

26. Pull stumps, if possible. If your pulling stumps or logs hose, coupling to the shaft as low as possible, or if you ask for a flip-over. Better yet, pull in the opposite direction, using the bumper or axle as an anchor point.

27. Copper core spark plug wires make a big difference in quality-driven as compared to cars, resistance wires.

28. Rule three brush number generators for the production of more than 15-16 amps max at startup, and 0-2 amps charge with candles and running.

29. The screws remain pointing at the plate in the distributor is often worn as the points move. Replace them with # 8-32 x 3 / 16 screws, available from your local Ford dealer as part number 355,047.

30. Open fuel two complete revolutions to normal operation, the road to one-liter reserve.

I hope thay information will be helpful for your equipment nexttime .