- Fertilizer,
- Balers,
- Wrappers.
Spreaders: always very precise

The spreaders are available in 50.1 W ISOBUS CCI 100 or with the terminal without the terminal command for use with the terminal ISOBUS the tractor.
Besides the advantages of the AXIS 50.1 W ‘standard’ (capacity of 500 kg / min., Weighing and control every second, up to 50 m working width, rotary shaker ultralente) version Isobus also:
- In the transmission housing 750 rpm. for a better fit on tractors that do not have the high power regime of 1000 rpm. PTO. A reduced engine speed for less fuel consumption.
- To the electric rise / fall of Telimat, driven by the control box.
Balers and wrappers: handling very simple and quick

The balers round baler with variable chamber, the combined-wrappers balers, presses high density but also the first round and square bale wrapper compatible Isobus can be controlled by the ICC or the terminal box Isobus the tractor.
So it will be possible, connect the camera to a CCI to follow the proper conduct of a combined cycle packing or control the evolution of bales in a press channel high density …
All these applications are designed to manage and control the machine more intelligent.
CCI 100, a multifunction terminal

The terminal will handle ISOBUS CCI in trust with various machines KUHN technology ISOBUS ISOBUS machines and also the other members of the ICC. This limits the number of such units in the cabin.
The main advantages of this terminal: color touch screen, ergonomics, evolving to accommodate additional features.
Within the range KUHN, come forth, as, other machines with the technology ISOBUS.

Transmission

The simpliest, and earlier, form PTO transmission. This shaft is connected to the tractor transmission. Bill worked only when the tractor clutch relased, so if you take the tractor from the teeth and slow down the Bill will stop working. This is a weakness in applications such as cutting.

This is frequently required to sit for Step clutch transmission. Without it, less equipment (like a knife cutting machine) applications in the PTO shaft, and then transmssion, because of inertia. Equipment will be “driving” tractor, and you still have to transfer clutch using tractor transmission. A clutch sit prevent this happening by allowing the shaft to turn to is not in one direction. In later models, is built into the tractor. In the old tractor, it is the additional equipment that is located in the Theatre shaft.

Live (clutch two-level)

Bill is living with a two-stage bill. Button half-way clutch to be escaped, and escaped the full delivery and level. This allows the operator to slow down or modify equipment and the RUU still operating.

Independent

Bill independent means that the control shaft with certain children. As Stage Live, giving full control of tractor and a separate Level control. There are two main types of independence: the mechanical and hydraulic. Bill uses a separate independent voters soil mechanics, along with interesting controls. Often, tractor must be stopped or for the position of this selector switch. Bill uses a single hydraulic-independent voters.
Listen
Read phonetically

It is also very important to ensure that you get a tractor that is suitable for the task to be done. When you do this, it is a good idea to discuss the many tractor dealers, who makes and models, whose price ranges and where vehicles can be modified with attachments of more than one meets their needs.

While the tractor itself, you can get the job done, the attachments, which actually do the work. As one dealer told us the tractor without attachments is basically a slow walk to the mailbox. Buy the right accessories you need to do the work, is an integral part of the tractor purchase.

The most common application to move materials around, and the work of front-end loader is a good choice. A simple scoop is two sides of the loader can be used to transport soil, rocks, dirt or other material to the compensatory and landscaping work, and carry heavy objects. Unlike most of the attachments, links to this popular tool in front of the tractor, and the back, which means it can stand, when you use the end of the other attachments.

Some popular Attachments:

* Box blades used to scrape or push the country classification, smoothing, or Bulldozer applications.

.

.

.

.

.

.

.

* Lawn mowers come in many forms: raw rock, and sweep the lawn mowers to cut the strong growth in lawn mowers and finishing more work.

.

.

.

* Agri-milling cutters plows, harrows and disc are excellent tools to prepare the fields.

.

.

.

.

.

.

* If the snow is a problem in their own territory, front-end plows and tractor fans will turn the snow removal machine.

.

.

.

* Backhoe cause serious digging power – but the high costs: they are the most expensive Attachments can be purchased. Not all tractors can support Backhoe either.

.

.

* Other attachments are landscape rakes, spreaders, forks, grabs, and hay Belarus.

Connection to any attachment to the tractor
Most attachments Construct a three-point area behind the tractor. This gives them the use of power take-off unit (PTO) as a power source. Almost all tractors use a standard 540 rpm PTO and three point hitch, which means that attachments are usually between different tractors. Make sure that your power rating is enough to PTO attachments you plan to use.

1000 and 2000 RPM ptosis is also available, but if you need a specialized attachment works only at a speed they are not important. Some tractors have PTO is located in the middle of the tractor operator. This can be useful for precise cutting, but it’s not very common.

Tractors are dangerous. They have a high priority. I confess and ditches and steep hills on my property and it would be easy for my tractor to run on its side, or even on your back.

Prevalence cage is very simple, but it is not the type you want tinkering. It must be strong and deeply attached to the tractor frame.

Pay attention to the safety instructions in the shaft. For example, shank came with strong warnings not to drill holes or weld the roll cage, no matter how much you want to add light to taunt her. You do not want to play with a roll cage, for fear of weakening.

One drawback of the roll cage is that the tractor size. He bumps into the tree branches high enough, for example. So this is not an unmixed blessing. But I am glad to have him.

The shank came with a belt. The guide says always wear seat belts, roll bar, because you can not prevent, attached to a tractor if you can not stay in his chair.

A bar has tractor general role of a few members of the vertical box located on each side of the location of the operator of the lower end of the box beam members sturdy houses with rear-wheel drive. The top of the box beam members are connected to a crossbeam in general over the driver’s seat. Each member upright box beam with a plate welded to the elongated lines the inside of one side of a member of the light box and the projection of a distance from the opposite plates to engage the other side to limit lateral Nappa of the vertical box beam member at a side of the tractor.
1. In a tractor with a tractor frame, including a substantial transmission housing to the rear and a pair of lateral expansion enclosures on both sides of the transmission housing with a pair of wheels arranged at the ends of the casings of axes, station manager between the wheel and the transmission housing assembly with a combination of an improved framework operator protects comprising: a pair of generally vertical bar members positioned on either side of the box station manager and bottom are connected to the houses in ashes, an elongated, extending along the body of the loop onto one side of each page, a cages inside light box and projecting them to a distance from the opposite side of the box beam members said loop control in the exercise said opposite side, after a certain amount of prior Buckling of box beam element to restrict deformation thereof, and a horizontal crossbar placed above the cab and connects to the top of the bar members.

2. The invention defined in claim 1, where each loop body consists of a vertical transverse plate is generally removed in the box beam member with an edge, said one side wall and the other side of said distributed over the entire face.

3. The invention defined in claim 2, where the lower part of each member box vertical bar has a rectangular cross section with opposite sides substantially wider than the front and rear plate loop members are located at the bottom of the box beam member and destroying the middle between front and rear.

4. The invention defined in claim 3, where members of the box beam is made of a pair of opposite channel-shaped members with the edges welded together, with plaque control loop members attached to the section on the arm of one of the channels.

5. The invention defined in claim 2, where the plate body control loop is attached to the outer sides of the vertical members of the box and extending towards the inside.

6. In a vehicle with a chassis assembly with the combination of an improved framework operator protector including at least one vertically elongated hollow beam member opposite sides, includes a control panel in a loop edge lay on one side and projecting laterally opposite edge and distributed loop control of said plate with said engaging side, after a predetermined amount Buckling of the face member of this board to deformation of the member to restrict said location and means for attaching the bar to the chassis members.

We put more content in Tractor prices, tractors for sale, showing john deere, massey ferguson, zetor, fendt tractor, vintage, antique and farm tractors stuck, ploughing

I think,this site will be helpful with you in next time.